Fantasie kann einem helfen, viele schöne Ideen auszudenken. Aber sie kann nichts machen. Wenn Sie sich den Kopf zerbrechen, wie Sie die Juniper JN0-330-Prüfung bestehen können, sollen Sie lieber Ihren Conputer öffnen und Pass4Test klicken. Sie werden was sehen, wie Sie wollen. Außerdem ist Pass4Test sehr preiswert und seine Produkte sind von guter Qualität. Wir versprechen, dass Sie die Prüfung 100% bestehen können.
Wofür zögern Sie noch?Sie haben nur eine Chance. Jetzt können Sie die vollständige Version zur Juniper JN0-330 Zertifizierungsprüfung bekommen. Sobald Sie die Pass4Test klicken, wird Ihr kleiner Traum erfüllt werden. Sie haben die besten Schulungsunterlagen zur Juniper JN0-330 Zertifizierungsprüfung kriegen. Benutzen Sie ruhig unsere Prüfungsfragen und Antworten, werden Sie sicher die Prüfung bestehen.
Viele IT-Fachleute wollen die Juniper JN0-330 Zertifizierungsprüfung bestehen, so dass sie im IT-Branche befördert, ihre Lebensverhältnisse verbessert und ihr Gehalt erhöht werden.Viele Leute haben viel Zeit und Energie für die Juniper JN0-330 Zertifizierungsprüfung verwendet, trotzdem fallen sie in der Prüfung durch. Es ist gar nicht kostengünstig. Wenn Sie Pass4Test wählen, können Sie viel Zeit und Energie ersparen und zwar die Prüfung erfolgreich bestehen. Denn die zielgerichteten Prüfungsmaterialien wird Ihnen helfen, die Prüfung 100% zu bestehen. Falls Sie in der Prüfung durchfallen, zahlen wir Ihnen die gesammte Summe zurück.
Die Produkte von Pass4Test wird Ihnen nicht nur helfen, die Juniper JN0-330 Zertifizierungsprüfung erfolgreich zu bestehen, sondern auch Ihnen einen einjährigen kostenlosen Update-Service zu bieten. Wir werden den Kunden die neuesten von uns entwickelten Produkte in der ersten Zeit liefern, so dass sue sich gut auf die Prüfung vorbereiten können. Falls Sie in der Prüfung durchfallen, zahlen wir Ihnen dann die gesammte Summe zurück.
Exam Code: JN0-330
Prüfungsname: Juniper (JN0-330-Enhanced Services, Specialist(JNCIS-ES))
In der heutigen wettbewerbsorientierten IT-Branche gibt es viele Vorteile, wenn man die Juniper JN0-330 Zertifizierungsprüfung besteht. Mit einem Juniper JN0-330-Zertifikat kann man ein hohes Gehalt erhalten. Menschen, die Juniper JN0-330-Zertifikat erhalten, haben oft viel höheres Gehalt als Kollegen ohne Juniper JN0-330-Zertifikat Jedoch ist es nicht sehr einfach, die Juniper JN0-330 Zertifizierungsprüfung zu bestehen. So hilft Pass4Test Ihnen, Ihr Gehalt zu erhöhen.
Unsere Prüfungsunterlage zu Juniper JN0-330 (JN0-330-Enhanced Services, Specialist(JNCIS-ES)) enthältet alle echten, originalen und richtigen Fragen und Antworten. Die Abdeckungsrate unserer Unterlage (Fragen und Antworten) zu Juniper JN0-330 (JN0-330-Enhanced Services, Specialist(JNCIS-ES)) ist normalerweise mehr als 98%.
Pass4Test ist eine Website, die Prüfungsressourcen den IT-leuten, die sich an der Zertifizierungsprüfung beteiligen, bieten. Es gibt verschiedene Schulungsmethoden und Kurse für verschiedene Studenten. Mit der Ausbildung von Pass4Test können die Studenten die Prüfung ganz leicht bestehen. Viele Kandidaten, die sich an der IT-Zertifizierungsprüfung beteiligt haben, haben die Prüfung mit Hilfe von Prüfungsfragen und Antworten sehr erfolglich abgelegt. So genießt Pass4Test einen guten Ruf in der IT-Branche.
JN0-330 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/JN0-330.html
NO.1 You want to create a policy allowing traffic from any host in the Trust zone to hostb.example.com
(172.19.1.1) in the
Untrust zone. How do you do create this policy?
A. Specify the IP address (172.19.1.1/32) as the destination address in the policy.
B. Specify the DNS entry (hostb.example.com.) as the destination address in the policy.
C. Create an address book entry in the Trust zone for the 172.19.1.1/32 prefix and reference this entry in
the policy.
D. Create an address book entry in the Untrust zone for the 172.19.1.1/32 prefix and reference this entry
in the policy.
Answer: D
Juniper zertifizierung JN0-330 JN0-330 echte fragen JN0-330 echte fragen JN0-330
NO.2 You want to enable SSH and Telnet access to the router's CLI. Under which configuration hierarchy
would you enable these protocols?
A. [edit system cli]
B. [edit security cli]
C. [edit system services]
D. [edit security services]
Answer: C
Juniper JN0-330 testantworten JN0-330 JN0-330
NO.3 Click the Exhibit button.
host_a is in subnet_a and host_b is in subnet_b.
Given the configuration shown in the exhibit, which statement is true about traffic from host_a to host_b?
A. DNS traffic is denied.
B. Telnet traffic is denied.
C. SMTP traffic is denied.
D. Ping traffic is permitted.
Answer: B
Juniper JN0-330 zertifizierungsantworten JN0-330
NO.4 Interface ge-0/0/2.0 of your router is attached to the Internet and is configured with an IP address and
network mask
of 71.33.252.17/24. A host with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. This
host isattached to the ge-0/0/0.0 interface of your router. You must use interface-based static NAT to
make the HTTP service on the host reachable from the Internet.
On which IP address and TCP port can Internet hosts reach the HTTP service?
A. IP address 10.10.10.1 and TCP port 8080
B. IP address 71.33.252.17 and TCP port 80
C. IP address 71.33.251.19 and TCP port 80
D. IP address 71.33.252.19 and TCP port 8080
Answer: D
Juniper JN0-330 exam fragen JN0-330 JN0-330 antworten JN0-330 zertifizierung
NO.5 Which statement is true about interface-based static NAT?
A. It also supports PAT.
B. It requires you to configure address entries in the junos-nat zone.
C. It requires you to configure address entries in the junos-global zone.
D. The IP addresses being translated must be in the same subnet as the incoming interface.
Answer: D
Juniper JN0-330 JN0-330 JN0-330 originale fragen JN0-330
NO.6 Host A opens a Telnet connection to Host B. Host A then opens another Telnet connection to Host B.
These connections are the only communication between Host A and Host B. The security policy
configuration permits both connections. How many flows exist between Host A and Host B?
A. 1
B. 2
C. 3
D. 4
Answer: D
Juniper zertifizierung JN0-330 zertifizierungsantworten JN0-330 JN0-330
NO.7 You are not able to telnet to the interface IP of your JUNOS software with enhanced services device
from a PC on the same subnet. What is causing the problem?
A. Telnet is not being permitted by self policy.
B. Telnet is not being permitted by security policy.
C. Telnet is not allowed because it is not considered secure.
D. Telnet is not enabled as a host-inbound service on the zone.
Answer: D
Juniper zertifizierungsantworten JN0-330 zertifizierung JN0-330 prüfungsfrage
NO.8 You must configure a SCREEN option that would protect your router from a session table flood.
Which configuration meets this requirement?
A. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
icmp {
ip-sweep threshold 5000;
flood threshold 2000;
}
B. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
tcp {
syn-flood {
attack-threshold 2000;
destination-threshold 2000;
}
C. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
udp {
flood threshold 5000;
}
D. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
limit-session {
source-ip-based 1200;
destination-ip-based 1200;
}
Answer: D
Juniper JN0-330 zertifizierung JN0-330 prüfungsfragen JN0-330
NO.9 In JUNOS software with enhanced services, which three packet elements are inspected to determine
if a session
already exists? (Choose three.)
A. IP protocol
B. IP time-to-live
C. source and destination IP address
D. source and destination MAC address
E. source and destination TCP/UDP port
Answer:ACE
Juniper JN0-330 prüfung JN0-330 exam fragen JN0-330 JN0-330 echte fragen
NO.10 Using a policy with the policy-rematch flag enabled, what happens to the existing and new sessions
when you change the policy action from permit to deny?
A. The new sessions matching the policy are denied. The existing sessions are dropped.
B. The new sessions matching the policy are denied. The existing sessions, not being allowed to carry
any traffic, simply timeout.
C. The new sessions matching the policy might be allowed through if they match another policy. The
existing sessions are dropped.
D. The new sessions matching the policy are denied. The existing sessions continue until they are
completed or their timeout is reached.
Answer:A
Juniper JN0-330 dumps JN0-330 JN0-330 zertifizierungsfragen
NO.11 Which two are components of the enhanced services software architecture? (Choose two.)
A. Linux kernel
B. routing protocol daemon
C. session-based forwarding module
D. separate routing and security planes
Answer: BC
Juniper JN0-330 JN0-330 echte fragen
NO.12 Click the Exhibit button.
Based on the configuration shown in the exhibit, what will happen to the traffic matching the security
policy?
A. The traffic is permitted through the myTunnel IPSec tunnel only on Tuesdays.
B. The traffic is permitted through the myTunnel IPSec tunnel daily, with the exception of Mondays.
C. The traffic is permitted through the myTunnel IPSec tunnel all day on Mondays, Wednesdays between
7:00 am and 6:00 pm, and Thursdays between 7:00 am and 6:00 pm.
D. The traffic is permitted through the myTunnel IPSec tunnel all day on Mondays, Wednesdays between
6:01 pm and 6:59 am, and Thursdays between 6:01 pm and 6:59 am.
Answer: C
Juniper zertifizierungsantworten JN0-330 prüfung JN0-330 JN0-330
NO.13 A route-based VPN is required for which scenario?
A. when the remote VPN peer is behind a NAT device
B. when multiple networks need to be reached across the tunnel
C. when the remote VPN peer is a dialup or remote access client
D. when a dynamic routing protocol such as OSPF is required across the VPN
Answer: D
Juniper JN0-330 antworten JN0-330
NO.14 Which two statements regarding asymmetric key encryption are true? (Choose two.)
A. The same key is used for encryption and decryption.
B. It is commonly used to create digital certificate signatures.
C. It uses two keys: one for encryption and a different key for decryption.
D. An attacker can decrypt data if the attacker captures the key used for encryption.
Answer: BC
Juniper zertifizierungsfragen JN0-330 JN0-330 zertifizierungsantworten JN0-330 antworten JN0-330
NO.15 Which three parameters are configured in the IKE policy? (Choose three.)
A. mode
B. preshared key
C. external interface
D. security proposals
E. dead peer detection settings
Answer: ABD
Juniper zertifizierungsantworten JN0-330 prüfungsunterlagen JN0-330 antworten JN0-330 JN0-330 originale fragen
NO.16 Click the Exhibit button.
In the exhibit, what is the priority for Router B in VRRP group 100?
A. 1
B. 100
C. 110
D. 255
Answer: B
Juniper JN0-330 JN0-330 echte fragen JN0-330 JN0-330 JN0-330
NO.17 Which three security concerns can be addressed by a tunnel mode IPSec VPN secured by AH?
(Choose three.)
A. data integrity
B. data confidentiality
C. data authentication
D. outer IP header confidentiality
E. outer IP header authentication
Answer:ACE
Juniper originale fragen JN0-330 dumps JN0-330
NO.18 Which command allows you to view the router's current priority for VRRP group 100 on interface
ge-0/0/1.0?
A. show vrrp
B. show vrrp group 100
C. show interfaces ge-0/0/1.0 vrrp group 100
D. show interfaces vrrp ge-0/0/1.0 group 100
Answer:A
Juniper JN0-330 prüfung JN0-330 prüfung
NO.19 Which two are components of the JUNOS software's routing policy? (Choose two.)
A. route-map
B. prefix-list
C. distribute-list
D. policy-statement
Answer: BD
Juniper JN0-330 originale fragen JN0-330 zertifizierungsfragen JN0-330 originale fragen
NO.20 On which three traffic types does firewall pass-through authentication work? (Choose three.)
A. ping
B. FTP
C. Telnet
D. HTTP
E. HTTPS
Answer: BCD
Juniper JN0-330 prüfung JN0-330 zertifizierungsfragen JN0-330 prüfungsunterlagen
NO.21 Click the Exhibit button.
In the exhibit, what is the purpose of this OSPF configuration?
A. The router sends the file debugOSPF (containing hellos sent and LSA updates) to the syslog server.
B. The router traces both OSPF hellos sent and LSA updates, and stores the results in the debugOSPF
file.
C. The router traces both OSPF hellos sent and LSA updates, and sends the results to the syslog process
with the debugOSPF facility.
D. The router traces all OSPF operations, stores the results in the debugOSPF file, and marks both hellos
sent and LSAupdates in the file with a special flag.
Answer: B
Juniper originale fragen JN0-330 JN0-330 originale fragen JN0-330 JN0-330 JN0-330
NO.22 Click the Exhibit button.
In the exhibit, which statement is correct?
A. Three physical interfaces are redundant.
B. You must define an additional Redundancy Group.
C. node 0 will immediately become primary in the cluster.
D. You must issue an operational command and reboot the system for the above configuration to take
effect.
Answer: D
Juniper JN0-330 JN0-330 prüfungsfragen JN0-330 dumps JN0-330
NO.23 Users can define policy to control traffic flow between which two components? (Choose two.)
A. from a zone to the router itself
B. from a zone to the same zone
C. from a zone to a different zone
D. from one interface to another interface
Answer: BC
Juniper zertifizierungsfragen JN0-330 testantworten JN0-330 JN0-330 JN0-330 prüfungsunterlagen JN0-330 prüfungsfrage
NO.24 A traditional router is better suited than a firewall device for which function?
A. VPN establishment
B. packet-based forwarding
C. stateful packet processing
D. network address translation
Answer: B
Juniper JN0-330 JN0-330 JN0-330
NO.25 Which two are characteristics of link-state routing protocols? (Choose two.)
A. Routers choose a best path for a destination based on the SPF algorithm.
B. All routers in a given area or level build a consistent database describing the network's topology.
C. Routers choose the best path for a destination based on the interface on which they received the link
stateadvertisement with the lowest cost.
D. All routers in a given area or level forward link state advertisements between interfaces in the same
area or level,
adding their metric to the link state advertisement's cost information when they forward it.
Answer:AB
Juniper JN0-330 JN0-330 originale fragen JN0-330
NO.26 Click the Exhibit button.
Which type of source NAT is configured in the exhibit?
A. static source pool
B. interface source pool
C. source pool with PAT
D. souce pool without PAT
Answer:A
Juniper prüfungsfragen JN0-330 antworten JN0-330 JN0-330 JN0-330
NO.27 Click the Exhibit button.
Based on the exhibit, client PC 192.168.10.10 cannot ping 1.1.1.2.
Which is a potential cause for this problem?
A. The untrust zone does not have a management policy configured.
B. The trust zone does not have ping enabled as host-inbound-traffic service.
C. The security policy from the trust zone to the untrust zone does not permit ping.
D. No security policy exists for the ICMP reply packet from the untrust zone to the trust zone.
Answer: C
Juniper JN0-330 prüfungsunterlagen JN0-330
NO.28 In a JSRP cluster with two J6350 routers, the interface ge-7/0/0 belongs to which device?
A. This interface is a system-created interface.
B. This interface belongs to NODE0 of the cluster.
C. This interface belongs to NODE1 of the cluster.
D. This interface will not exist because J6350 routers have only six slots.
Answer: C
Juniper dumps JN0-330 prüfungsfragen JN0-330 prüfungsfrage
NO.29 Which parameters must you select when configuring operating system probes SCREEN options?
A. syn-fin, syn-flood, and tcp-no-frag
B. syn-fin, port-scan, and tcp-no-flag
C. syn-fin, fin-no-ack, and tcp-no-frag
D. syn-fin, syn-ack-ack-proxy, and tcp-no-frag
Answer: C
Juniper prüfungsunterlagen JN0-330 echte fragen JN0-330
Pass4Test ist eine Website, die Bequemlichkeiten für die Juniper JN0-330 Zertifizierungsprüfung bietet. Nach den Forschungen über die Fragen und Antworten in den letzten Jahren kann Pass4Test die Themen zur Juniper JN0-330 Zertifizierungsprüfung effektiv erfassen. Die Juniper JN0-330-Prüfungsübungen haben eine große Ähnlichkeit mit realen Prüfungsübungen.
没有评论:
发表评论