Sind Sie auf EMC E20-816 Zeritifizierungsprüfung bereit? Die Prüfungszeit ist angekommen. Sind Sie sehr selbstbewusst für die Prüfungen? Wenn Sie nicht sehr Selbstbewusst, empfehlen wir Ihnen die ausgezeichneten Prüfungsunterlagen. Mit den neuesten E20-816 dumps von Pass4Test können Sie in sehr beschränkter Zeit diese Prüfung zu bestehen.
Es ist nicht leicht für ITer, die IT-Zertifizierungen zu besitzen. Aber Diese Weise ist am besten für sie, ihre Fähigkeit zu entwickeln und ihren Wert zu beweisen. Deshalb müssen viele Leute diese Prüfungen anmelden. So, gibt es eine einfache Methode, dass sie diese IT-Zertifizierungsprüfungen sehr leicht bestehen. Selbstverständig! Die Pass4Test dumps ist die beste Wahl. Alle Prüfungsunterlagen sind an Pass4Test vorhanden. Und es kann Ihre Forderungen erfüllen. Sie können sich mehr über die Prüfungsunterlagen an Pass4Test informieren.
Exam Code: E20-816
Prüfungsname: Symmetrix Solutions Expert Exam for Technology Architects
Aktulisiert: 2014-02-16
Nummer: 156 Q&As
Die Produkte von PassTest sind für diejenigen, die sich an der EMC E20-816 Zertifizierungsprüfung beteiligen. Die Schulungsmaterialien von Pass4Test enthalten nicht nur Trainingsmaterialien zur EMC E20-816 Zertifizierungsprüfung, um Ihre Fachkenntnisse zu konsolidieren, sondern auch die genauen Prüfungsfragen und Antworten. Wir versprechen, dass Sie nur einmal die EMC E20-816 Zertifizierungsprüfung mit einer hohen Note bestehen können.
Die Feedbacks von den IT-Kandidaten, die die schulungsunterlagen zur IT-Prüfung von Pass4Test benutzt haben, haben sich bewiesen, dass es leich ist, die Prüfung mit Hilfe von unseren Pass4Test Produkten einfach zu bestehen. Zur Zeit hat Pass4Test die Schulungsprogramme zur beliebten EMC E20-816 Zertifizierungsprüfung, die zielgerichteten Prüfungen beinhalten, entwickelt, um Ihr Know-How zu konsolidieren und sich gut auf die Prüfung vorzubereiten.
Pass4Test hat riesiege Expertenteam, die Ihnen gültige Schulungsressourcen bieten. Sie haben die Prüfungen in den letzten Jahren nach ihren Erfahrungen und Kenntnissen untersucht. Und endlich kommen die zielgerichteten Fragen und Antworten auf, die den IT-Kandidaten große Hilfe bieten. Nun können Sie im Internet teilweise die Prüfungsfragen und Anworten zur EMC E20-816 Zertifizierungsprüfung kostenlos als Probe herunterladen. Viele IT-Fachleute haben bewiesen, dass Pass4Test sehr zuverlässig ist. Wenn Sie die zielgerichteten Prüfungsfragen von Pass4Test benutzt haben, können Sie normalerweise die EMC E20-816 Zertifizierungsprüfung bestehen. Schicken Sie doch die Produkte von Pass4Test in den Warenkorb. Sie werden sehr wahrscheinlich der nächste erfolgreiche IT-Fachmann.
100% Garantie Symmetrix Solutions Expert Exam for Technology Architects Prüfungserfolg. Wenn Sie Pass4Test E20-816 Prüfung wählen EMC Pass4Test Test Engine ist das perfekte Werkzeug, um auf die Zertifizierungsprüfung vorbereiten. Erfolg kommt einfach, wenn Sie bereiten mit Hilfe von Original bis zu Symmetrix Solutions Expert Exam for Technology Architects Produkte mit Pass4Test Datum. Wie ein seltener Fall, wenn Sie es versäumen, diese Prüfung geben wir Ihnen eine volle Rückerstattung Ihres Einkaufs passieren.
E20-816 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/E20-816.html
NO.1 A customer's application is stored on a DMX-4. The application runs 24x7x365. They would like to send
consistent replicas of this data simultaneously to four branch offices on a nightly basis. The branch offices
have CLARiiON arrays.
Which solution would you recommend?
A. Use TimeFinder/Mirror to create a consistent replica of the production application. Then use Open
Replicator cold push to replicate the data from the BCVs to the remote offices.
B. Use Open Replicator cold push to replicate the data to the remote offices.
C. Use Open Replicator hot push to replicate the data to the remote offices.
D. Use TimeFinder/Snap to create a consistent replica of the production application. Then use Open
Replicator cold push to replicate the data on the VDEVs to the remote offices.
Answer: A
EMC E20-816 testantworten E20-816 zertifizierung
NO.2 The customer wants a TimeFinder/Snap solution to create a point in time prior to modifying the source
data for testing purposes. The snap would be kept for 8 hours. How should the Change Tracker data
collection be set up to model the solution?
A. Sum report with a reset of 4 hours
B. Delta report with a reset of 16 hours
C. Delta report with a reset of 4 hours
D. Delta report with a reset of 8 hours
Answer: D
EMC zertifizierung E20-816 E20-816 E20-816 zertifizierungsfragen E20-816 testantworten
NO.3 A customer is planning to implement SRDF/S into their environment. The customer wants zero data
loss if they lose their primary data center (R1). The distance is 1,000 miles, and the customer would like to
maintain an application response time of 10 ms.
Which design would you implement?
A. SRDF/AR single-hop
B. SRDF/AR multi-hop
C. SRDF/DM
D. SRDF/S with adaptive copy initially
Answer: B
EMC echte fragen E20-816 E20-816 E20-816 originale fragen
NO.4 A company has a Symmetrix V-Max array in an open systems environment. They want to use
TimeFinder/Snap to create a single copy per day of a production environment containing 200 volumes of
8 GB each. Twenty-five percent of the total I/O in the application is write activity.
What is the amount of physical storage required for all VDEVs?
A. 50 GB
B. 4 GB
C. 8 GB
D. 0 GB
Answer: D
EMC E20-816 originale fragen E20-816 E20-816 exam fragen E20-816
NO.5 A customer is migrating their Windows 2008 servers from HP storage to EMC V-Max storage.
Host-based performance metrics need to be used to design a configuration. EMC recommends the
diskperf -Y command to enable I/O statics in every server.
Why is enabling disk statistics collection recommended?
A. It improves performance of the servers
B. Otherwise, a reboot will be required to activate
C. Otherwise, you must start Performance Monitor
D. Because Windows 2008 leaves the default value to off
Answer: B
EMC prüfungsfragen E20-816 dumps E20-816 originale fragen
NO.6 The customer wants to replace the three DMX 2000s with a single Symmetrix V-Max using Open
Replicator hot pull for the move. What sequence of steps should be taken to get ready for the copy
sessions?
LUN Masking of DMX 2000 remote volumes to the V-Max FA ports.
V-Max and DMX 2000 arrays are reachable via the same fabric or SAN extension.
FA ports of V-Max are zoned to FA ports of the three DMX 2000s.
V-Max and DMX 2000 arrays are reachable via point-to-point or FC-AL.
LUN Masking of the V-Max control volumes to the DMX 2000 FA ports.
All V-Max FAs have access to the DMX 2000 volumes being migrated.
A. 4,6,1,3
B. 4,3,5,6
C. 2,3,1,6
D. 2,3,5,6
Answer: C
EMC E20-816 originale fragen E20-816 antworten E20-816 prüfung E20-816
NO.7 The customer wants a TimeFinder/Snap solution to create a point in time prior to modifying the source
data for testing purposes with a 16-hour RPO.
How should the Change Tracker data collection be set up to model the solution.?
A. Delta report with a reset of 8 hours
B. Delta report with a reset of 16 hours
C. Delta report with a reset of 4 hours
D. Sum report with a reset of 8 hours
Answer: B
EMC E20-816 E20-816 exam fragen
NO.8 An Open Replicator data migration from a HDS to Symmetrix array is being proposed. The customer
has the following requirements: Application downtime should be minimal and Open Replicator session
failure must not result in data loss
Which solution will meet the customer's requirements?
A. Cold pull with precopy
B. Cold pull with donor update
C. Hot pull with donor update
D. Hot pull with precopy
Answer: C
EMC testantworten E20-816 exam fragen E20-816
NO.9 What are the key differences between SIRT in 5772 and SIRT in Symmetrix V-Max with 5874?
A. SIRT in 5874 is enabled for all write sizes or if RTT > 115 microsec
B. SIRT in 5874 is enabled for write sizes up to 64 KB or RTT threshold > 520 microsec
C. SIRT in 5874 is enabled for all write sizes or if RTT < 115 microsec
D. SIRT in 5874 is enabled for write sizes up to 128 KB or if RTT < 115 microsec
Answer: A
EMC zertifizierung E20-816 E20-816
NO.10 Click the Calculator icon in the upper left-hand corner.
SRDF/S over Fibre Channel has been configured between two V-Max arrays that are 50 kilometers apart.
What is the expected write response time delay due to latency?
A. 0.25 ms
B. 0.5 ms
C. 1 ms
D. 2 ms
Answer: C
EMC dumps E20-816 E20-816 exam fragen E20-816 antworten
NO.11 The customer has a DMX-4 replicating to another DMX-4 (microcode level 5773 for both) over an
SRDF/S session between two sites 20 km apart and wants to understand the limitation (if any) of using
the Single Round Trip (SiRT) feature on RF directors. What is the applicable limitation of the setup?
A. SiRT only works for an I/O size of less than 32 KB.
B. SiRT is enabled for all block sizes.
C. SiRT would not work because the distance is greater than 12 km.
D. SiRT only works for SRDF/A.
Answer: A
EMC E20-816 E20-816 exam fragen E20-816 zertifizierungsfragen E20-816
NO.12 A customer is implementing a new SRDF/S environment with DMX arrays. The primary and secondary
data centers are 20 kilometers apart.
Which consideration is needed for planning, designing, and implementing a synchronous solution?
A. Ensure that the application can tolerate the additional latency
B. Ensure that adequate cache on the arrays is allocated
C. Ensure that the RAID configuration is identical on both arrays
D. Ensure that there is twice the recommended amount of bandwidth
Answer: A
EMC E20-816 antworten E20-816 E20-816 testantworten
NO.13 A customer is running SRDF/A single session mode. They want to change into SRDF/S mode after
nightly periods of high write activity have completed. The switch to synchronous mode failed.
What is a potential cause for this failure?
A. SRDF/S cycle switching feature is not enabled.
B. Mode change feature is only supported with Concurrent SRDF.
C. SDRF/A write cache is not enabled at the remote site.
D. Fifty percent or more of SRDF/A write cache is in use on the target Symmetrix.
Answer: D
EMC zertifizierungsantworten E20-816 E20-816 originale fragen E20-816 E20-816 prüfungsfragen E20-816
NO.14 A customer wants to migrate from DMX-3 with 5772 to DMX-4 with 5773 code. They are using
TimeFinder/Clone every night for backup processing with synchronous COFW. TimeFinder/Clone with
5773 allows them to use a new feature called asynchronous COFW.
How many back-end operations does TimeFinder/Clone make with Enginuity 5773 using Aynchronous
COFW compared with TimeFinder/Clone with Enginuity 5772?
A. Back-end operations are lower with 5773 Enginuity.
B. Back-end operations are the same in both Enginuity versions.
C. Back-end operations are higher with 5773 Enginuity.
D. Depends on disk speed and RAID protection.
Answer: B
EMC E20-816 E20-816 E20-816 E20-816 E20-816 antworten
NO.15 A customer has a single V-Max and you are helping to design a new SRDF solution. This customer
wants to replicate all its data with SRDF over a Gigabit Ethernet.
In order to get the maximum benefit from scaling, what is the most important consideration?
A. All GigE ports on the source should be able to see all GigE ports on the target array
B. Ports must have auto-negotiation off because we don't support Jumbo Frames
C. Speed limit value in the Symmetrix configuration file (not persistent)
D. Speed limits can be set on GigE ports from 100 to 10000 Mb (megabits)
Answer: A
EMC originale fragen E20-816 zertifizierungsantworten E20-816 E20-816 antworten E20-816 exam fragen E20-816
Pass4Test bietet Ihnen die neusten C_TFIN22_64 exam Unterlagen und C_TSCM42_66 pdf Fragen & Antworten mit hoher Qualität. Unser CD0-001 zertifizierung und 000-784 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative 00M-503 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.
Artikel Link: http://www.pass4test.de/E20-816.html
没有评论:
发表评论