Pass4Test stehen Ihnen eine Abkürzung zum Erfolg zur Verfügung. Dabei erspart Pass4Test Ihnen viel Zeit und Energie. Pass4Test wird Ihnen gute Trainingsinstrumente zur LSI L50-501 Zertifizierungsprüfung bieten und Ihnen helfen , die LSI L50-501 Zertifizierungsprüfung zu bestehen. Wenn Sie auch die relevante Materialien auf anderen Websites sehen, schauen Sie mal weiterhin, dann werden Sie finden, dass diese Materialien eigentlich aus Pass4Test stammen. Unsere Pass4Test bieten die umfassendste Information und aktualisieren am schnellsten.
Die Materialien zur LSI L50-501 Zertifizierungsprüfung von Pass4Test werden speziell von dem IT-Expertenteam entworfen. Sie sind zielgerichtet. Durch die Zertifizierung können Sie Ihren internationalen Wert in der IT-Branche verwirklichen. Viele Anbieter für Antwortenspeicherung und die Schulungsunterlagen versprechen, dass Sie die LSI L50-501 Zertifizierungsprüfung mit ihren Produkten bestehen können. Pass4Test sagen mit den Beweisen. Der Moment, wenn das Wunder vorkommt, kann jedes Wort von uns beweisen.
Exam Code: L50-501
Prüfungsname: LSI SVM5 Implementation Engineer
Aktulisiert: 2013-12-26
Nummer: 119 Q&As
Die LSI L50-501-Prüfung sind jedem IT-Fachmann sehr wichtig. Solange Sie das Zertifikat bekommen, werden Sie im Beruf sicher nicht aussondert. Sie werden befördert und ein höheres Gehalt beziehen. Mit diesem Zertifikat können Sie alle bekommen, was Sie wünschen. Die Schulungsunterlagen zur LSI L50-501-Prüfung von Pass4Test sind die Ressourcen zum Erfolg. Mit diesen Schulungsmaterialien werden Sie den Schritt zum Erfolg beschleunigen. Sie werden sicher mehr selbstbewusster.
Ein wunderbares Leben ist es, dass man sich wagt, nach etwas zu trachten. Wenn Sie eines Tages in einem wackligen Stuhl sitzt und Ihre Vergangenheit erinnern, können Sie einfach lächern. Das bedeutet, dass Ihr Leben erfolgreich ist. Wollen Sie ein erfolgreiches Leben führen?Dann benutzen Sie doch die Schulungsunterlagen zur LSI L50-501-Prüfung von Pass4Test, die Fragen und Antworten beinhalten und jedem Kandidaten sehr passen. Ihre Erfolgsquote beträgt 100%. Sie sollen Pass4Test so schnell wie möglich kaufen.
Ob man in einem bestimmten Bereich den Erfolg macht, spiegelt an Ihren Zertifizierungen, sowie in IT-Industrie. Deshalb wollen viele Leute an LSI L50-501 Zertifizierungsprüfungen teilnehmen, um Ihre selbe Fähigkeit zu beweisen. Und es ist nicht einfach, LSI L50-501 Zertifizierung zu bekommen. Aber wenn sie den kürzeren Weg finden, können Sie diese Prüfung leicht bestehen. So wollen Wir Ihnen Pass4Test dumps empfehlen. Es kann Ihnen helfen, weniger Zeit zu verwenden und die Prüfung zu bestehen.
L50-501 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/L50-501.html
NO.1 Which statement about the SVM server software upgrade is true?
A. The SVM server must be rebooted as part of the software upgrade process.
B. The SVM server must only be rebooted on major versions, e.g 5.1 to 5.2.
C. The SVM server can stay online during the software upgrade.
D. The DPMs must be taken offline during the SVM server reboot.
Answer: A
LSI prüfungsfragen L50-501 exam fragen L50-501 zertifizierungsantworten
NO.2 Your current SAN environment includes a storage system with LUNs exposed directly to Windows hosts.
You have been asked to integrate this storage system into the new SVM domain. Which statement is
correct?
A. The existing data can be moved to an SVM virtual volume while the application is still writing to the
source LUN.
B. The physical LUN containing the data must be unmounted from the host while the data is been moved
to an SVM virtual volume.
C. The physical LUN containing the data must be mounted to the host while the data is been moved to an
SVM virtual volume.
D. The physical LUN containing the data must be mounted to the SVM servers while the data is been
moved to an SVM virtual volume.
Answer: B
LSI exam fragen L50-501 prüfung L50-501 antworten L50-501
NO.3 Which statement describes what should be performed after a DPM image upgrade?
A. The DPM rank must be modified.
B. Set the DPM maximum frame size.
C. The DPM image upgrade does not change the DPM configuration parameters.
D. Configure the DPM ports type and speed.
Answer: C
LSI testantworten L50-501 L50-501 zertifizierungsfragen L50-501
NO.4 During the SVM Management software installation, which two adapters would you select to be
controlled by the SVM? (Choose two.)
A. Emulex Fibre Channel adapter
B. Qlogic Fibre Channel adapter
C. Microsoft iSCSI initiator
D. Smart Array controller
Answer: B,C
LSI L50-501 antworten L50-501 prüfungsfragen L50-501 antworten L50-501 prüfungsfragen L50-501 prüfungsunterlagen
NO.5 What are two requirements to set up a stretched SVM domain across two datacenters on the same
campus? (Choose two.)
A. Both SVM servers must be located on the same site.
B. The sites must be interconnected through two fabrics/ISLs.
C. Each site must have a minimum of one copy of the setup volume.
D. A dedicated IP link must be provided to interconnect the SVM servers.
Answer: B,C
LSI L50-501 L50-501 L50-501 L50-501 prüfung
NO.6 Where is the SVM metadata stored?
A. On a mirror, between the two SVM internal hard drives.
B. On a mirror, between the managed storage array LUNs and the SVM internal hard drive.
C. On a mirror, between managed storage array LUNs.
D. On a mirror, between the two SVM internal hard drive partitions.
Answer: C
LSI zertifizierung L50-501 L50-501 L50-501 L50-501 prüfung L50-501
NO.7 At the end of the SVM installation, which three actions should you perform to ensure that the installation
is correct.? (Choose three.)
A. Test failover between two SVMs to make sure that you can successfully failover between SVMs.
B. Make sure that the SVM recognizes the DPM and that the DPM recognizes all of the devices that are
connected to the DPM ports.
C. Make sure that the SVM and DPM recognize the LUNs available on the storage array.
D. Make sure that the DPMs can communicate with each other.
E. Make sure that the LSI Failover Driver is installed on the SVM server.
Answer: A,B,C
LSI L50-501 L50-501
NO.8 A customer wants to create a SVM stripe. Which SVM stripe value should be set?
A. 64 KB
B. 256 KB
C. 512 KB
D. 1 MB
Answer: D
LSI zertifizierungsantworten L50-501 L50-501
NO.9 What is the difference between the active SVM server and the passive SVM server?
A. The passive SVM server takes control when the active SVM server is too busy.
B. The passive SVM server is a standby server only and does not perform any management tasks.
C. The passive SVM server can only modify objects but cannot create objects.
D. The passive SVM server can only manage user accounts.
Answer: B
LSI antworten L50-501 antworten L50-501 testantworten L50-501 zertifizierung
NO.10 Which parameter must be the same for SVM servers that manage the same SVM domain?
A. serial number
B. SVM domain name
C. computer name
D. WWNN
Answer: B
LSI prüfungsfragen L50-501 L50-501 echte fragen L50-501 antworten L50-501
NO.11 When adding storage to an existing SVM pool, what must be considered?
A. Growing the LUN will provide better utilization of storage.
B. Always pay attention to the performance characteristics of the storage.
C. Always select storage with different storage characteristics.
D. Adding storage to an existing pool will reduce performance.
Answer: B
LSI dumps L50-501 prüfung L50-501 zertifizierungsantworten L50-501 prüfung
NO.12 You have a customer that feels that their application can take advantage of striping their data. Which
two conditions will improve performance? (Choose two.)
A. Striping across two different storage systems.
B. Servers are running a transactional application where I/Os per second are required.
C. Disks that are available for inclusion in the stripe set are not of equal size.
D. Disks that are available for inclusion in the stripe set are of equal size.
Answer: A,D
LSI originale fragen L50-501 zertifizierung L50-501 prüfungsfrage L50-501 dumps
NO.13 Two SVM servers in SVM Domain A are connected over Fibre Channel with two SVM servers in SVM
Domain B. The SVM servers' HBA at each domain can see the SVM servers' HBA at the other SVM
domain. What should you do to interconnect the SVM domains?
A. An SVM automatically negotiates the connection with the SVMs in other domains over Fibre Channel.
B. SVM domains should not be interconnected.
C. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect SVM
Domain.
D. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect FC
Domain.
Answer: A
LSI testantworten L50-501 exam fragen L50-501 L50-501
NO.14 What should you do before starting the SVM server software upgrade process?
A. Reboot the SVM server.
B. Disconnect the SVM Fibre Channel cables.
C. Shut down the SVM Web server.
D. Uninstall the SVM server agent.
Answer: B
LSI L50-501 L50-501 L50-501 zertifizierungsantworten L50-501 originale fragen
NO.15 A customer is running a cluster with cluster nodes and storage on either site and requires synchronous
mirroring across the two sites. You proposed a stretched SVM domain and now you need to configure the
zoning. Which two zoning rules apply to this configuration? (Choose two.)
A. Each DPM must see both storage systems.
B. Each DPM must only see the local storage system.
C. Each cluster node must see both SVM servers.
D. The SVM servers must see each other.
Answer: A,D
LSI originale fragen L50-501 prüfungsfrage L50-501 L50-501 zertifizierung
Pass4Test bietet Ihnen die neusten 000-955 exam Unterlagen und LOT-951 pdf Fragen & Antworten mit hoher Qualität. Unser 1Y0-A19 zertifizierung und 100-500 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative HP0-Y46 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.
Artikel Link: http://www.pass4test.de/L50-501.html
没有评论:
发表评论