Pass4Test ist führend in der neuesten Microsoft 70-642 Zertifizierungsprüfung und Prüfungsvorbereitung. Unsere Ressourcen werden ständig überarbeitet und aktualisiert, mit einer engenVerknüpfung. Wenn Sie sich heute auf die Microsoft 70-642 Zertifizierungsprüfung vorbereiten, sollen Sie bald die neueste Schulung beginnen und die nächste Prüfungsfragen bestehen. Weil die Mehrheit unserer Fragen monatlich aktualisiert ist, werden Sie die besten Ressourcen mit marktfrischer Qualität und Zuverlässigkeit bekommen.
Unsere Prüfungsunterlage zu Microsoft 70-642 (TS: Windows Server 2008 Network Infrastructure, Configuring Certification ) enthältet alle echten, originalen und richtigen Fragen und Antworten. Die Abdeckungsrate unserer Unterlage (Fragen und Antworten) zu Microsoft 70-642 (TS: Windows Server 2008 Network Infrastructure, Configuring Certification ) ist normalerweise mehr als 98%.
100% Garantie TS: Windows Server 2008 Network Infrastructure, Configuring Certification Prüfungserfolg. Wenn Sie Pass4Test 70-642 Prüfung wählen Microsoft Pass4Test Test Engine ist das perfekte Werkzeug, um auf die Zertifizierungsprüfung vorbereiten. Erfolg kommt einfach, wenn Sie bereiten mit Hilfe von Original bis zu TS: Windows Server 2008 Network Infrastructure, Configuring Certification Produkte mit Pass4Test Datum. Wie ein seltener Fall, wenn Sie es versäumen, diese Prüfung geben wir Ihnen eine volle Rückerstattung Ihres Einkaufs passieren.
Um keine Reue und Bedauern in Ihrem Leben zu hinterlassen, sollen Sie jede Gelegenheit ergreifen, um das Leben zu vebessern. Haben Sie das gemacht?Die Schulungsunterlagen zur Microsoft 70-642 Zertifizierungsprüfung von Pass4Test helfen den IT-Fachleuten, die Erfolg erzielen wollen, die Microsoft 70-642 Zertifizierungsprüfung zu bestehen. Um den Erfolg nicht zu verpassen, machen Sie doch schnell.
Um die Microsoft 70-642 Zertifizierungsprüfung zu bestehen, brauchen Sie eine ausreichende Vorbereitung und eine vollständige Wissensstruktur. Die von Pass4Test bietenden Ressourcen würden Ihre Bedürfnisse sicher abdecken.
Laut Umfragen haben die Microsoft 70-642 Prüfung heutzutage hohe Konjunktur in IT-Zertifizierungen. Tatsächlich ist die Zertifizierungsprüfung sehr wichtig. Und jetzt ist diese Prüfung öffentlich zertifiziert. Außerdem kann diese Prüfung Ihre sehr ausgezeichnete IT-Fähigkeit beweisen. Aber ist es sehr schwer, diese Prüfung zu bestehen. Und die Schwierigkeit ist so groß wie ihre Bedeutung. Trotzt dieser Schwierigkeit sorgen Sie sich bitte nicht um den Erfolg, die Prüfung ablegen, weil Pass4Test Ihnen hilft, diese schwierige 70-642 Prüfung zu bestehen.
Wir sollen im Leben nicht immer etwas von anderen fordern, wir sollen hingegen so denken, was ich für andere tun kann. In der Arbeit können Sie große Gewinne für den Boss bringen, legt der Boss natürlich großen Wert auf Ihre Position sowie Gehalt. Wenn wir ein kleiner Angestellte sind, werden wir sicher eines Tages ausrangiert. Wir sollen uns bemühen, die Zertifizierung zu bekommen und Schritt für Schritt nach oben gehen. Die Fragen und Antworten zur Microsoft 70-642-Prüfung von Pass4Test helfen Ihnen, den Erfolg durch eine Abkürzung zu erlangen. Viele IT-Fachleute haben die Schulungsunterlagen zur Microsoft 70-642-Prüfung von Pass4Test gewählt.
Exam Code: 70-642
Prüfungsname: TS: Windows Server 2008 Network Infrastructure, Configuring Certification
Aktulisiert: 2013-12-24
Nummer: 350 Q&As
70-642 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/70-642.html
NO.1 Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link
connects the main office to a branch office. All computers in the branch office are configured with static IP
addresses. The branch office does not use DHCP and uses a different subnet.
You need to ensure that the portable computers can connect to network resources at the main office and
the branch office.
How should you configure each portable computer?
A. Use a static IPv4 address in the range used at the branch office.
B. Use an alternate configuration that contains a static IP address in the range used at the main office.
C. Use the address that was assigned by the DHCP server as a static IP address.
D. Use an alternate configuration that contains a static IP address in the range used at the branch office.
Answer: D
Microsoft 70-642 70-642 70-642 70-642 exam fragen
NO.2 Your network contains a single Active Directory domain. All servers run Windows Server 2008 R2. A
DHCP server is deployed on the network and configured to provide IPv6 prefixes. You need to ensure that
when you monitor network traffic, you see the interface identifiers derived from the Extended Unique
Identifier (EUI)-64 address. Which command should you run?
A. netsh.exe interface ipv6 set global addressmaskreply=disabled
B. netsh.exe interface ipv6 set global dhcpmediasense=enabled
C. netsh.exe interface ipv6 set global randomizeidentifiers=disabled
D. netsh.exe interface ipv6 set privacy state=enabled
Answer: C
Microsoft antworten 70-642 70-642 70-642 zertifizierung 70-642
NO.3 Your network contains a DHCP server named DHCP1 that runs Windows Server 2008 R2. All client
computers on the network obtain their network configurations from DHCP1. You have a client computer
named Client1 that runs Windows 7 Enterprise. You need to configure Client1 to use a different DNS
server than the other client computers on the network. What should you do?
A. Configure the scope options.
B. Create a reservation.
C. Create a DHCP filter.
D. Define a user class.
Answer: B
Microsoft antworten 70-642 70-642 dumps 70-642 exam fragen 70-642 echte fragen 70-642
NO.4 Your network uses IPv4.
You install a server that runs Windows Server 2008 R2 at a branch office. The server is configured with
two network interfaces.
You need to configure routing on the server at the branch office. Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. Install the Routing and Remote Access Services role service.
B. Run the netsh ras ip set access ALL command.
C. Run the netsh interface ipv4 enable command.
D. Enable the IPv4 Router Routing and Remote Access option.
Answer: A, D
Microsoft 70-642 exam fragen 70-642 70-642
NO.5 You have a DHCP server that runs Windows Server 2008 R2. You need to reduce the size of the
DHCP database.
What should you do?
A. From the DHCP snap-in, reconcile the database.
B. From the folder that contains the DHCP database, run jetpack.exe dhcp.mdb temp.mdb.
C. From the properties of the dhcp.mdb file, enable the File is ready for archiving attribute.
D. From the properties of the dhcp.mdb file, enable the Compress contents to save disk space attribute.
Answer: B
Microsoft originale fragen 70-642 testantworten 70-642 dumps 70-642 zertifizierungsantworten 70-642 zertifizierung
NO.6 Your company has an IPv6 network that has 25 segments. You deploy a server on the IPv6 network.
You need to ensure that the server can communicate with all segments on the IPv6 network.
What should you do?
A. Configure the IPv6 address as fd00::2b0:d0ff:fee9:4143/8.
B. Configure the IPv6 address as fe80::2b0:d0ff:fee9:4143/64.
C. Configure the IPv6 address as ff80::2b0:d0ff:fee9:4143/64.
D. Configure the IPv6 address as 0000::2b0:d0ff:fee9:4143/64.
Answer: A
Microsoft 70-642 70-642 dumps 70-642
NO.7 Your company is designing its public network. The network will use an IPv4 range of 131.107.40.0/22.
The network must be configured as shown in the following exhibit.
You need to configure subnets for each segment.
Which network addresses should you assign?
A. Segment A: 131.107.40.0/23
Segment B: 131.107.42.0/24
Segment C: 131.107.43.0/25
Segment D: 131.107.43.128/27
B. Segment A: 131.107.40.0/25
Segment B: 131.107.40.128/26
Segment C: 131.107.43.192/27
Segment D: 131.107.43.224/30
C. Segment A: 131.107.40.0/23
Segment B: 131.107.41.0/24
Segment C: 131.107.41.128/25
Segment D: 131.107.43.0/27
D. Segment A: 131.107.40.128/23
Segment B: 131.107.43.0/24
Segment C: 131.107.44.0/25
Segment D: 131.107.44.128/27
Answer: A
Microsoft prüfungsfragen 70-642 antworten 70-642 zertifizierungsfragen 70-642 70-642
NO.8 You have a DHCP server that runs Windows Server 2008 R2. The DHCP server has two network
connections named LAN1 and LAN2.
You need to prevent the DHCP server from responding to DHCP client requests on LAN2. The server
must continue to respond to non-DHCP client requests on LAN2.
What should you do?
A. From the DHCP snap-in, modify the bindings to associate only LAN1 with the DHCP service.
B. From the DHCP snap-in, create a new multicast scope.
C. From the properties of the LAN1 network connection, set the metric value to 1.
D. From the properties of the LAN2 network connection, set the metric value to 1.
Answer: A
Microsoft 70-642 exam fragen 70-642
NO.9 You need to capture the HTTP traffic to and from a server every day between 09:00 and 10:00.
What should you do?
A. Create a scheduled task that runs the Netsh tool.
B. Create a scheduled task that runs the Nmcap tool.
C. From Network Monitor, configure the General options.
D. From Network Monitor, configure the Capture options.
Answer: B
Microsoft dumps 70-642 70-642 zertifizierungsantworten
NO.10 Your company is designing its network. The network will use an IPv6 prefix of
2001:DB8:BBCC:0000::/53. You need to identify an IPv6 addressing scheme that will support 2000
subnets.
Which network mask should you use?
A. /61
B. /62
C. /63
D. /64
Answer: D
Microsoft zertifizierungsantworten 70-642 70-642 70-642 prüfungsunterlagen
NO.11 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Routing and Remote Access service (RRAS) role service installed. You need to view all inbound VPN
packets. The solution must minimize the amount of data collected.
What should you do?
A. From RRAS, create an inbound packet filter.
B. From Network Monitor, create a capture filter.
C. From the Registry Editor, configure file tracing for RRAS.
D. At the command prompt, run netsh.exe ras set tracing rasauth enabled.
Answer: B
Microsoft prüfungsfrage 70-642 testantworten 70-642 70-642 zertifizierung 70-642
NO.12 Your network contains 100 servers that run Windows Server 2008 R2. A server named Server1 is
deployed on the network. Server1 will be used to collect events from the Security event logs of the other
servers on the network.
You need to define the Custom Event Delivery Optimization settings on Server1.
Which tool should you use?
A. Event Viewer
B. Task Scheduler
C. Wecutil
D. Wevtutil
Answer: C
Microsoft originale fragen 70-642 70-642
NO.13 Your company has an IPv4 Ethernet network.
A router named R1 connects your segment to the Internet. A router named R2 joins your subnet with a
segment named Private1. The Private1 segment has a network address of 10.128.4.0/26. Your computer
named WKS1 requires access to servers on the Private1 network. The WKS1 computer configuration is
as shown in the following table.
WKS1 is unable to connect to the Private1 network by using the current configuration. You need to add a
persistent route for the Private1 network to the routing table on WKS1.
Which command should you run on WKS1?
A. Route add -p 10.128.4.0/22 10.128.4.1
B. Route add -p 10.128.4.0/26 10.128.64.10
C. Route add -p 10.128.4.0 mask 255.255.255.192 10.128.64.1
D. Route add -p 10.128.64.10 mask 255.255.255.192 10.128.4.0
Answer: B
Microsoft 70-642 zertifizierungsfragen 70-642 70-642
NO.14 Your network contains a server that has the SNMP Service installed.
You need to configure the SNMP security settings on the server.
Which tool should you use?
A. Local Security Policy
B. Scw
C. Secedit
D. Services console
Answer: D
Microsoft prüfung 70-642 testantworten 70-642
NO.15 You have a Windows Server 2008 R2 computer that has an IP address of 172.16.45.9/21. The server
is configured to use IPv6 addressing.
You need to test IPv6 communication to a server that has an IP address of 172.16.40.18/21.
What should you do from a command prompt?
A. Type ping 172.16.45.9:::::.
B. Type ping ::9.45.16.172.
C. Type ping followed by the Link-local address of the server.
D. Type ping followed by the Site-local address of the server.
Answer: C
Microsoft 70-642 70-642 prüfungsfragen 70-642
NO.16 Your network contains a domain controller named DC1 and a member server named Server1.
You save a copy of the Active Directory Web Services (ADWS) event log on DC1. You copy the log to
Server1.
You open the event log file on Server1 and discover that the event description information is unavailable.
You need to ensure that the event log file displays the same information when the file is open on Server1
and on DC1.
What should you do on Server1?
A. Import a custom view.
B. Copy the SYSVOL folder from DC1.
C. Copy the LocaleMetaData folder from DC1.
D. Create a custom view.
Answer: C
Microsoft prüfung 70-642 zertifizierungsfragen 70-642 70-642 70-642
NO.17 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 is
configured as a DNS server.
You need to ensure that Server1 only resolves queries issued from client computers in the same subnet
as Server1. The solution must ensure that Server1 can resolve Internet host names.
What should you do on Server1?
A. Configure Windows Firewall.
B. Create a conditional forwarder.
C. Modify the routing table.
D. Create a trust anchor.
Answer: A
Microsoft 70-642 70-642 70-642 prüfungsunterlagen
NO.18 Your network contains a server that runs Windows Server 2008 R2. You plan to create a custom script.
You need to ensure that each time the script runs, an entry is added to the Application event log.
Which tool should you use.?
A. Eventcreate
B. Eventvwr
C. Wecutil
D. Wevtutil
Answer: A
Microsoft 70-642 70-642 prüfung 70-642 70-642 prüfungsfragen
NO.19 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
SNMP Service installed.
You perform an SNMP query against Server1 and discover that the query returns the incorrect
identification information.
You need to change the identification information returned by Server1. What should you do?
A. From the properties of the SNMP Service, modify the Agent settings.
B. From the properties of the SNMP Service, modify the General settings.
C. From the properties of the SNMP Trap Service, modify the Logon settings.
D. From the properties of the SNMP Trap Service, modify the General settings.
Answer: A
Microsoft 70-642 prüfungsunterlagen 70-642 70-642
NO.20 Your company has computers in multiple locations that use IPv4 and IPv6. Each location is protected
by a firewall that performs symmetric NAT.
You need to allow peer-to-peer communication between all locations. What should you do?
A. Configure dynamic NAT on the firewall.
B. Configure the firewall to allow the use of Teredo.
C. Configure a link local IPv6 address for the internal interface of the firewall.
D. Configure a global IPv6 address for the external interface of the firewall.
Answer: B
Microsoft exam fragen 70-642 zertifizierung 70-642 70-642 prüfungsunterlagen 70-642 70-642
Pass4Test bietet Ihnen die neusten ICYB exam Unterlagen und 640-916 pdf Fragen & Antworten mit hoher Qualität. Unser HP3-C33 zertifizierung und 000-225 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative 00M-624 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.
Artikel Link: http://www.pass4test.de/70-642.html
没有评论:
发表评论